•  
  •  
Mills:

1. Okuma MC50VA 4 axis vertical with CAT 50 tooling with 4th axis 20” chuck
 x-y-z travels 44.3x20x26

2. Okuma MC50VA 4 axis vertical with CAT 50 tooling with 4th axis 12” chuck
x-y-z travels 44.3x20x26

3. Okuma MC4VA 4 axis vertical with CAT 40 tooling with 4th axis  x-y-z travels 30x17x18

4.  Acer Bridgeport mill Ultima 30kh with DRO on X, Y, & Z

Software:

1.  Pathtrace System consisting of:
a.  Edge Cam security key
b.  4 axis turning module
c.  C & Y axis turning module
d.  Multiplane milling modul
e.  4 axis mill/2 axis turn   
f.  Surface design/mill module
Lathes:

 1.  Okuma LR15W CNC, with 10” chuck on main spindle & 8” chuck on sub-spindle; 5 axis with
  Chipblaster 1000 psi max turn 10” o.d. x 24” long

2.  Okuma LB35II, CNC, with 18” chuck, 60” between centers (steady rest to 13.5”)

3.  Okuma LB35II, CNC, with 16” chuck, 81” between centers  (steady rest to 13.5”)

4.  Okuma LB45II CNC, with  24” chuck,  80” between centers  (steady rest to 25”)

5.  Okuma Cadet, CNC with 8” chuck 16” between centers

6.   Okuma Crown 762S big bore  with 10” chuck 3.15 thru with 12’ bar feed to 3” o.d.

7.  Kingston HJ 1700 lathe Gap Bed w/ 17-1/2” swing and 96” between centers w/DRO

 8.  Kingston HD 2290 lathe Gap Bed w/ 22-1/2” swing and 72” between centers w/DRO
        
image-618645-DSC01626.w640.JPG
image-618650-DSC01840.w640.JPG
image-618652-DSC01852.w640.JPG
image-618655-photo4.JPG
image-618653-photo.JPG
image-618671-IMG_0585.w640.jpg
image-675868-IMG_4625.w640.JPG
Inspection Equipment:

1.  Mitutoyo 36” Programmable Linear Height gage on a 36” x 48” x 6” Thick Granite table

2.  Wilson Rockwell Hardness Tester with 11” max. height

3.  King Portable Brinell Hardness Tester with Scope

4.  EquiTip Portable Hardness Tester w/ LED Display

5.  Mahr Federal Portable Surface Tester w/ LED Display

6.  Gagemaker Mic Trac 2024-E Measurement Center

7.  Micro-Vu Optical Comparator With 12” Screen
Band Saws:

1.  Rockwell Model 20 Vertical Band Saw

2.  Vertical Band Saw - Model 14cs

3.  Do-All Model C-916 Band Saw


Other:
         1.  Thread Roller- Cleveland
         2.  Tool Grinders, Pedestal
         3.  Belt Sander 6” wide
         4.  Rockwell Table Saw
         5.  Drill Press- Pedestal
         6.  Part’s Tumbler

image-618648-DSC01725.w640.JPG
image-618649-DSC01767.w640.JPG
image-618643-CIMG0086.w640.JPG
image-618654-photo1.JPG
image-618656-photo5.JPG
image-618670-DSC01870.w640.JPG
image-633117-IMG_4491.w640.JPG
image-633118-IMG_3364.w640.JPG
image-675867-IMG_3768.w640.JPG